New Release -- August 9th, 2013

[KnightRider]

Originally Posted by theriversong

I am trying to figure out how many trees I need...I have come up with a formula however I believe that while the formula is correct I am not using the correct information. I was using 1 day view in the ingredient planner but my question is does one day fill the facilities I have. The amounts are very low like only 18 Maple Sap trees required. However if I use the fill to capacity then the amounts are HUGE. If I use the 15 because the facilities produce 15 days worth, again the amounts are huge. Like almost 4000 Oak Trees. I have a lot of trees and want to cut them down, more importantly my storage amount of tree products are all well over 100,000 stored most closer to the 200,000 or more. Can someone please explain the ingredient planner in terms of which category to fill the facilities and could it really be I need almost 4000 Oak trees to work my facilities?

Is it Oak log piles or Oak Lumber pile that it says you need 4000 to fill? The Oak log pile is the cut trees and the Oak log pile is used in less facilities than the Oak Lumber pile. I bet it is the Oak Lumber pile, my Oak Lumber pile shows that I need over 4000 for the 15 days, so if it is the Lumber pile, yes it is possible.

The ingredient planner shows you how many items it takes to fill the facilities that you have according to the filters that you have set, which means say if you are on farm 2 and the filter is set for current farm, then the planner would only show what is needed to fill the facilities on that farm only, if it is set to all farms then the planner will tell you how many ingredients it takes to fill all of your facilities for however many days you have it set for, 1 day up to 1 year and the one that says to remaining capacity is 15 days. I hope this helps.