OFFICIAL Quests

[Taz D]

Originally Posted by Sundos

So my regular quest to make 10xMimosa is messed up! I have harvested many green grapes in past 24 hours.. I have stored and started and stored and started many times the champagne barrel. And it keeps saying 4/10 started after I leave no matter how many I have started again.. I think this is a picture of the last time I started 2 more barrels if I can share my clip right... but this is like the 4th time I am started 2 more barrels in last 1 hr .. so it should say 6/10 this time.. but I think when I come back it is going to say 4/10 .. the facility is getting worked and I am storing and starting over repeatedly. PLEASE FIX IT! ID number ( 1303461736 ) https://www.facebook.com/photo/?fbid...693223&__cft__[0]=AZWYw7EvZImQ2HG_ZgrDw5wgLOP_YVdr09Vk-PA1LG5mXEcUsQ3CfS5pdUS0XfwaT_ZCHVFVIGLdrN5OhrYQbcJ 2CuEkc7QZIq6RFBt5ovtbTQ&__tn__=EH-R

and I just went back to see my regular quest again.. and this is what it says
https://www.facebook.com/photo/?fbid...693223&__cft__[0]=AZV7TK1x8DLMd6S9rBmQudnJMhw0ZD2MHue4PJk9T0WYXJLr-j1m7MRzUZBaD41dYagS-CCVz95oESu4gaV5YXMA9Gxv0JwcAl8lhynI1y8bWw&__tn__=E H-R

Hi Sundos,
To make Champagne in the Wine Cellar requires 10 champagne barrels from the winery. Each batch of champagne barrels in the winery only makes 2 barrels. So you need 5 batches completed one at a time. If you have more than 1 winery, go to each of them and start a batch in each and that will shorten the time needed to complete.

[Sundos]

Originally Posted by Taz D

Hi Sundos,
To make Champagne in the Wine Cellar requires 10 champagne barrels from the winery. Each batch of champagne barrels in the winery only makes 2 barrels. So you need 5 batches completed one at a time. If you have more than 1 winery, go to each of them and start a batch in each and that will shorten the time needed to complete.

thanks Taz.. but 1 hr ago I started this inquiry here with 2 pictures.. did you see that I had a picture that showed 6/10 barrels started that would take 18 hrs to complete

and 2 minutes later the next picture after I saved, exited, and went back.. shows only 4/10 barrels started and it would take 4 hrs to complete?

what happened to the other 2 barrels I had started? in 2 minutes time?

edited to add... I only have 1 winery

[Taz D]

Originally Posted by Sundos

thanks Taz.. but 1 hr ago I started this inquiry here with 2 pictures.. did you see that I had a picture that showed 6/10 barrels started that would take 18 hrs to complete

and 2 minutes later the next picture after I saved, exited, and went back.. shows only 4/10 barrels started and it would take 4 hrs to complete?

what happened to the other 2 barrels I had started? in 2 minutes time?

edited to add... I only have 1 winery

Hi Sundos,
It apparently corrected because it can only do 1 batch at a time. You might want to consider buying 1 or 2 more wineries as that will speed up this production as wella s your producing in the wine cellar for normal operation.
I am sorry, but we can not see your photos you posted. The links say content not available.

[Sundos]

Originally Posted by Taz D

Hi Sundos,
It apparently corrected because it can only do 1 batch at a time. You might want to consider buying 1 or 2 more wineries as that will speed up this production as wella s your producing in the wine cellar for normal operation.
I am sorry, but we can not see your photos you posted. The links say content not available.

I have started this step many times and no matter what I start and save and then exit and come back it only shows 4/10 started.. I placed 2 different pictures, 2 minutes apart that showed the last time I started 2 more in production.. so 6/10. and the 2nd picture just 2 minutes later only shows 4/10 started.. and you didn't look at the pictures until now and they say content not available. SO..

I have went back and changed the pictures to public view now.. I am so sorry to keep bothering you with this, but would you please try the pictures again... I seem to not be able to tell you the problem.. but maybe you could see it if you are able to now see the pictures? Please ... thanks for trying to help me.
PS . I don't need them to HURRY to produce.. I JUST them to work with what I have done.

[Taz D]

Originally Posted by Sundos

I have started this step many times and no matter what I start and save and then exit and come back it only shows 4/10 started.. I placed 2 different pictures, 2 minutes apart that showed the last time I started 2 more in production.. so 6/10. and the 2nd picture just 2 minutes later only shows 4/10 started.. and you didn't look at the pictures until now and they say content not available. SO..

I have went back and changed the pictures to public view now.. I am so sorry to keep bothering you with this, but would you please try the pictures again... I seem to not be able to tell you the problem.. but maybe you could see it if you are able to now see the pictures? Please ... thanks for trying to help me.
PS . I don't need them to HURRY to produce.. I JUST them to work with what I have done.

Hi Sundos,
You have to wait for them to finish the first ones you have already started. It will not show the rest until those get done. There isn't anything we can do to change that.

[Sundos]

Ok I just don't get it.. like always.. thanks Taz for you time and effort.

[lillymc]

this has happened twice... I clicked on the facility to create copper ore .. I went on about my business and when I got home it had reset - .. this happened to me last week too but I didn't report it .. is this a glitch and how do I ensure that clicking the separate tasks are actually being accepted by the software?

the small ones aren't a problem but when you have an 8 hour task and then have to start over again 8 hours later .. kind of frustrating ..

[Taz D]

Originally Posted by lillymc

this has happened twice... I clicked on the facility to create copper ore .. I went on about my business and when I got home it had reset - .. this happened to me last week too but I didn't report it .. is this a glitch and how do I ensure that clicking the separate tasks are actually being accepted by the software?

the small ones aren't a problem but when you have an 8 hour task and then have to start over again 8 hours later .. kind of frustrating ..

Hi lillymc,
This happens if the facility is already full. You can tell it is full if the only button for the product showing is the Start Batch button. That is telling you that there are no batches available to start. If you click on that and then go back to the quest it will show one has started, but it actually hasn't because the facility can't start one.
How do you tell if it has started? There must be at least a +1 button next to the Start Batch button.

[lillymc]

Originally Posted by Taz D

Hi lillymc,
This happens if the facility is already full. You can tell it is full if the only button for the product showing is the Start Batch button. That is telling you that there are no batches available to start. If you click on that and then go back to the quest it will show one has started, but it actually hasn't because the facility can't start one.
How do you tell if it has started? There must be at least a +1 button next to the Start Batch button.

Only I have not been doing any thing at all.. I have been only pushing ships.. not doing any facility work at all other than the quest.. would this happen if I had not stored anything for a while?

[Tiger]

Originally Posted by lillymc

Only I have not been doing any thing at all.. I have been only pushing ships.. not doing any facility work at all other than the quest.. would this happen if I had not stored anything for a while?

Hi lillmc,

Taz is not available at this time.

No storing does not start a quest step. If the facility was already at maximum then at some point prior to that one of these happened:

• From inside the facility - clicked the All or one of the + buttons with a number showing which could have started all the remaining batches available on the copper ore instead of starting a single batch.
  
  
• used the Start All at the top of the Facility Manager prior to checking the quest or used the Start All on the specific facility from the Facility Manager.

As Taz has already recommended to you when you open a facility from the quest, check there is at least a +1 showing along with the start batch button before you start a single batch.

When you have started a single batch, you can then close the quest manager and then reopen it again to check if the step has started. If there is no time showing then the step has not started.

If there is no +1 showing when you open the facility from the quest to be able to start just a single batch as long as you had not used the Start All at the top of the Facility Manager earlier, before you checked on the quest to see if any quest steps needed doing, what you also try is the following:

Open your Facility Manager and look for all your other mineral mines and see if one of those has at least the +1 showing when you open the mine to start a single batch in one of those instead. Then check the quest to make sure that the step has started

.